AIRCOND CHEMICAL OVERHAUL · KL & SELANGOR
Aircond Chemical Overhaul in KL & Selangor — Deep Internal Cleaning
When a chemical wash isn't enough, we go deeper. Indoor-unit dismantling, individual component cleaning, drainage inspection and testing across KL & Selangor. Overhaul from RM219.
From RM219
Wall-mounted 1.0–1.5HP
Indoor Unit Dismantling
Individual component clean
30-Day Warranty
On workmanship
CHEMICAL OVERHAUL PRICING · 2026
Chemical Overhaul Price List
Every price below is a starting rate. The final scope is confirmed after checking the unit and access — before any additional work begins.
Wall-Mounted Units
| Horsepower | Starting Price |
|---|---|
| 1.0 – 1.5 HP | From RM 219 |
| 2.0 – 2.5 HP | From RM 280 |
| 3.0 HP | From RM 330 |
Ceiling Cassette Units
| Horsepower | Starting Price |
|---|---|
| 1.0 – 1.5 HP | From RM 280 |
| 2.0 – 3.0 HP | From RM 330 |
| 3.5 – 6.0 HP | Quoted after inspection |
Prices are starting rates and cover the standard overhaul scope described above. Additional work (repairs, parts, gas, special access) is quoted separately. Multi-unit pricing is available — just ask when you message us. All prices shown before SST where applicable. For a complete overview, see our full overhaul pricing.
WHAT IT IS
What Is an Aircond Chemical Overhaul?
A chemical overhaul is a deeper cleaning service where the indoor unit is dismantled so key internal components can be cleaned individually. The unit is then reassembled and tested.
A chemical wash cleans the coil and blower while they're still inside the unit. It's the right service for most routine deep-cleaning situations — you can read more about what a chemical wash covers if that's what you're looking for.
A chemical overhaul goes further. We remove the components that a mounted cleaning can't fully reach, clean each one individually, and put everything back together. It's not a bigger version of a wash — it's a different level of access.
Components cleaned in a typical overhaul:
Evaporator coil
Deep-cleaned to remove built-up dust, mould, and grime that restricts airflow.
Blower wheel
Removed and cleaned individually — it can hold significant dust and residue over time.
Drain pan / tray
Exposed and scrubbed — where slime and organic buildup often collects.
Indoor casing
Casing and accessible internal parts cleaned before reassembly.
Drainage path
Drain pipe flushed and checked for blockages as part of the service.
Filters & accessible parts
Filters and reachable internal components cleaned and checked.
Every unit is different. The exact scope depends on the model, the level of contamination, and what we find during inspection. We confirm what we'll do — in writing — before we start.
THE DIFFERENCE
Chemical Wash vs Chemical Overhaul
These two services get confused all the time. Here's the honest breakdown — including when a wash is actually the better choice.
| Aspect | Chemical Wash | Chemical Overhaul |
|---|---|---|
| Unit position | Mostly stays mounted | Indoor unit dismantled |
| Cleaning depth | Deeper clean without full teardown | More extensive internal cleaning |
| Blower access | Limited / accessible cleaning | Removed for deeper cleaning |
| Drain pan | Cleaned in place where accessible | Removed / exposed for deeper cleaning |
| Best for | Heavy dirt but serviceable unit | Severe contamination or deeper access needed |
| Time on site | Shorter visit | Longer visit |
| Starting price | From RM149 | From RM219 |
THE HONEST PART
A chemical overhaul is more extensive, but not every aircond needs one. If your unit is only lightly dirty, a normal service or chemical wash is usually enough. We won't recommend an overhaul unless we genuinely think your unit benefits from it.
SIGNS TO WATCH FOR
Do You Actually Need a Chemical Overhaul?
Any of these signs may justify an inspection. The condition of the unit matters more than a fixed number.
01
Musty smell keeps coming back
If the smell returns after a wash, the blower wheel is one area worth inspecting more closely. Read more about musty smell that keeps coming back.
02
Blower wheel looks black
Visible dark grime inside the unit often points to buildup that surface cleaning can't fully remove.
03
Long time since last deep clean
Units that have gone a long time without deep cleaning may have heavy internal buildup. Condition matters more than a fixed number.
04
Weak cooling despite gas being fine
A clogged coil can restrict airflow even when refrigerant and compressor are working normally. See our guide on weak cooling despite gas being fine.
05
Water leak keeps returning
If clearing the drain hasn't fixed the leak, the tray or internal drainage area may need deeper access. See our water leak repair service for more on this.
06
A recent wash didn't fix the problem
If a chemical wash was done recently and the same issue came back, the source is probably in a part that wasn't reached.
THE HONEST PART
When You Probably Don't Need an Overhaul
We'd rather tell you honestly when a simpler service will do the job — than sell you something you don't need.
A normal service or chemical wash is probably enough if:
- ✓Your unit is only lightly dirty
- ✓Cooling is still normal
- ✓There's no persistent odour
- ✓There's no recurring drainage problem
- ✓The unit was recently deep cleaned
If you're not sure, send us a photo on WhatsApp. We'll give you an honest indication of what's likely needed before you book anything.
SCOPE
What's Included, What's Extra
An overhaul is a cleaning service. It doesn't automatically include repairs, parts, or refrigerant work. Here's exactly what's in and what isn't.
INCLUDED
- ✓Indoor unit dismantling
- ✓Evaporator coil deep cleaning
- ✓Blower wheel cleaning
- ✓Drain pan / tray cleaning
- ✓Casing and accessible parts cleaning
- ✓Drainage inspection / flushing
- ✓Reassembly, drainage test, cooling and airflow test
- ✓30-day workmanship warranty
NOT AUTOMATICALLY INCLUDED
- ×PCB repair or replacement
- ×Capacitor or fan motor replacement
- ×Compressor work
- ×Refrigerant leak repair or top-up
- ×Drain pump or drain hose replacement
- ×Wall hacking or concealed piping
- ×High-rise special access equipment
If a leak, fault, or refrigerant issue is found during the overhaul, we'll let you know what's needed and quote it separately. You decide whether to proceed. If it turns out your unit needs a different repair, we can point you toward our aircond repair service.
OUR PROCESS
How a Chemical Overhaul Works
Our standard process covers inspection, dismantling, deep cleaning, reassembly and testing.
01
Inspect
Check unit condition, contamination level, drainage, and access. Confirm what's actually needed before starting.
02
Dismantle
Remove the required indoor-unit components safely. Protect surrounding walls, flooring, and furniture.
03
Deep clean
Clean the evaporator coil, blower wheel, drain pan, and other components individually.
04
Reassemble
Dry, reconnect, and reassemble the unit correctly. Mounting alignment and drainage slope are checked at this stage.
05
Test
Run the unit and check cooling, airflow, drainage, and abnormal noise. We confirm everything's working before we leave.
REAL EXPECTATIONS
Can a Chemical Overhaul Fix My Problem?
Honest answer: it depends on what's actually causing the issue. Here's what cleaning can help with — and what needs a different service.
| Problem | Can Overhaul Help? | Notes |
|---|---|---|
| Heavy dirt buildup | Yes — this is the main purpose | Cleaning removes contamination that builds up internally. |
| Weak airflow from dirt | Can improve airflow when dirt is the main cause | Airflow problems can also come from fan motor, PCB, filter, or ducting issues. |
| Musty smell | Often improves | Contamination on the blower wheel is one common source. |
| Drainage dirt / blockage | Partially | Cleaning helps with dirt. Structural issues need separate work. |
| Cracked drain pan | Inspection only | Replacement is a separate job. |
| Low refrigerant | No | Needs refrigerant diagnosis and, where required, leak repair and correct recharging. |
| PCB, motor, compressor faults | No | Component repair needed. |
WHAT THIS MEANS
Cleaning is not a substitute for diagnosis. If you're not sure whether your aircond needs a clean or a repair, describe the symptoms on WhatsApp and we'll tell you honestly which route makes sense.
UNIT TYPES
Wall-Mounted vs Ceiling Cassette
Overhaul process is similar in principle, but access and starting prices differ.
Wall-Mounted Units
Common in homes. Easier indoor access. Most rely on gravity drainage. Starting price from RM219.
Often completed in one visit, depending on unit condition and access.
Ceiling Cassette & Ducted Units
Common in offices, restaurants, and some larger homes. More involved access. A drain pump may be involved. Starting price from RM280.
Where a drain pump is fitted, we check its operation during the visit.
BRANDS WE SERVICE
Daikin, Panasonic, Mitsubishi & Other Major Brands
We service both inverter and non-inverter units across KL and Selangor. The overhaul process is adjusted for each unit type — inverter models have sensitive electronics that we protect during the clean.
Daikin · Panasonic · Mitsubishi Electric · York · LG · Samsung · Acson · Hitachi · Toshiba · Sharp · Midea · Gree
COVERAGE
Chemical Overhaul Across KL & Selangor
Kuala Lumpur
KLCC · Bangsar · Cheras · Ampang · Mont Kiara · Setapak · Wangsa Maju · Sentul
Selangor
Petaling Jaya · Subang Jaya · Shah Alam · Puchong · Klang · Kota Damansara · Seri Kembangan
Don't see your area? Message us to confirm coverage.
FAQ
Aircond Chemical Overhaul Questions
What is an aircond chemical overhaul?
It's a deeper cleaning service where the indoor unit is dismantled so key internal components — like the blower wheel and drain pan — can be cleaned individually. The unit is then reassembled and tested. It goes further than a chemical wash, which cleans the unit while mounted.
What's the difference between chemical wash and chemical overhaul?
A chemical wash cleans the coil and blower while the unit stays mounted. A chemical overhaul dismantles the indoor unit so components can be cleaned separately. Overhaul is more extensive and takes longer — but not every unit needs it.
When does an aircond need a chemical overhaul?
Common signs include a musty smell that comes back after a wash, visible dark buildup on the blower wheel, weak cooling despite gas being fine, or a unit that hasn't been deep-cleaned in a long time. Condition matters more than a fixed time period — we'll tell you honestly if a wash would be enough.
How much does chemical overhaul cost in KL & Selangor?
Wall-mounted units start from RM219 (1.0–1.5HP), RM280 (2.0–2.5HP), and RM330 (3.0HP). Ceiling cassette units start from RM280. Final scope and price are confirmed after inspection — before any additional work begins.
Does chemical overhaul include full dismantling?
The indoor unit is dismantled enough to access and clean the key components — evaporator coil, blower wheel, drain pan, and casing. It's not a complete teardown of every internal part, since that isn't necessary for a cleaning service. The exact scope depends on the model and its condition.
Does chemical overhaul fix water leaking?
It can help when dirt buildup or an accessible drainage problem is contributing to the leak. But an overhaul doesn't automatically fix every water leak. Drain hose routing, damaged pans, drain pumps, installation slope, and refrigerant-related icing may need separate diagnosis.
Does chemical overhaul include gas top-up?
No. Refrigerant top-up or leak repair is not automatically included unless stated in the quoted scope. If refrigerant is low, we'll let you know and quote it separately. For refrigerant-related issues, see our aircond gas top-up page.
How long does a chemical overhaul take?
A typical wall-mounted overhaul takes around 2–3 hours on-site. Ceiling cassette or heavily contaminated units may take longer. We confirm the estimated time after inspection.
BAHASA MALAYSIA
Cuci Overhaul Aircond KL & Selangor — Cool Pro
Cuci chemical biasa tak selesaikan masalah anda? Bau hapak datang balik lepas beberapa minggu? Mungkin unit anda perlukan cuci overhaul aircond — servis pembersihan lebih mendalam di mana unit dalam ditanggalkan dan setiap komponen dibersihkan satu-satu.
Bezanya begini: cuci chemical biasa membersihkan coil dan blower semasa unit masih dipasang. Cuci overhaul tanggalkan unit untuk capai bahagian yang tak boleh dicuci bila terpasang — terutama blower wheel dan drain pan.
Cool Pro menyediakan servis cuci overhaul aircond di seluruh Kuala Lumpur dan Selangor. Kami cari punca dahulu — dan akan beritahu anda dengan jujur jika cuci chemical biasa sudah mencukupi.
HARGA CUCI OVERHAUL:
Wall-mounted 1.0–1.5HP — dari RM 219
Wall-mounted 2.0–2.5HP — dari RM 280
Wall-mounted 3.0HP — dari RM 330
Ceiling cassette 1.0–1.5HP — dari RM 280
Ceiling cassette 2.0–3.0HP — dari RM 330
Harga penuh dikonfirmasi selepas pemeriksaan unit.
APA YANG TERMASUK:
Tanggal unit dalam → Cuci coil dan blower → Cuci drain pan → Cuci casing → Periksa saliran → Pasang semula → Uji prestasi.
Pembaikan komponen (PCB, kapasitor, motor, kompresor) dan tambah gas tidak termasuk melainkan dinyatakan dalam sebut harga.
Semua harga belum termasuk SST (jika berkenaan). Harga boleh berubah bergantung kepada keadaan unit dan akses.
Still Smelling Musty?
Let's Take a Look.
Send us a photo of your indoor unit. We'll tell you honestly whether an overhaul is needed — or if a wash is enough. No obligation.
WhatsApp NowCool Pro · Aircond Chemical Overhaul across KL & Selangor since 2015 · CIDB & JKKP Certified.